MS sandariklis statyboms ir silikonas: kuris geriau tinka projektams

Vertinant MS sandariklis statyboms against traditional silicone, the answer depends on your project's specific demands. MS polymer sealants — built on silane-terminated prepolymer chemistry — deliver paintability, zero silicone oil migration, and low VOC compliance that silicone simply cannot match. Silicone retains advantages in extreme UV exposure and high-temperature glazing. For green building procurement, facade sealing, and OEM product differentiation, MS sealants represent the more versatile, regulation-ready choice. This article breaks down the technical and commercial differences to help B2B buyers make a confident sourcing decision.

Understanding MS Sealants and Silicone Sealants

What Is an MS Polymer Sealant?

MS sealer, which stands for Modified Silicone or Silyl Modified Polymer (SMP), is an elastomeric caulk that cures when it comes in contact with water. Its backbone ends in silane, which gives it the mechanical toughness of polyurethane and the corrosion resistance of silicone. When it dries, it turns into a strong, bendable rubber that can allow structural joints to move up to ±25–50% (according to ISO 9047). Jiaobao's one-part RTV MS sealant has a tensile strength of about 2.2 MPa and an elongation at break of about 400%. This makes it perfect for demanding applications on the outside of buildings and in furniture joints.

What Defines a Traditional Silicone Sealant?

Silicone sealants use polydimethylsiloxane chemistry, which makes them very resistant to UV light and heat above 150°C. They are the standard in the business world for structural glass, curtain wall systems, and sealing around the edges of windows. But silicone over time gives off silicone oil, which is a plasticizer migration effect that stains porous surfaces like marble and granite and makes it impossible for paint to stick to cured surfaces. These problems are well-known in the literature on facade care, and they often lead architects to look for MS sandariklis statyboms silane polymer options for high-value stone cladding projects.

​

Comprehensive Comparison: MS Sealant vs Silicone Sealant

The changes in performance between these two chemicals are most obvious when they are used in real building. Before you decide to buy in bulk, here are the main technical and practical differences you should look at:

• Paintability: Cured MS sealant accepts water-based paints, lacquers, and wallpapers directly on its surface without adhesion loss. Silicone surfaces repel most coatings due to low surface energy, making touch-up and renovation work impractical in painted interiors.
• Substrate contamination: MS polymer contains no plasticizers or silicone oils that migrate into adjacent materials. On natural stone, this eliminates the dark "framing" stain that silicone sealant characteristically produces over time.
• VOC and health profile: Jiaobao's MS sealant is solvent-free, formaldehyde-free, isocyanate-free, and classified as low-VOC. This positions it for GEV-EMICODE EC1 and similar certifications required by green building programs. Silicone sealants vary widely in VOC content depending on formulation type (neutral cure vs. acetoxy cure).
• Adhesion versatility: MS polymer bonds primerless to glass, aluminum, PVC, concrete, most ceramics, and wood in a single product. Silicone performs best on non-porous substrates and often requires a primer on concrete or timber.

These differences are very important for buying teams that have to handle different substrate plans for the same project. It's easy to see why silane polymer sealants are becoming more popular in high-end construction markets around the world after looking at these factors that make them different.

Curing Behavior and Project Scheduling

It takes Jiaobao's MS sealer 25–40 minutes to become tack-free in the summer and 15–30 minutes in the winter. It cures at a rate of about 3.5 mm per day. Silicone dries at about the same speed, but it needs clean, dry surfaces. Using MS sandariklis statyboms on slightly damp substrates is okay, which is a big plus for working outside when the weather is unpredictable.

Which Sealant Is Best for Specific Construction Needs?

Ultimately, the choice between MS and silicone depends on three things: the type of material, the finish standards, and the environmental compliance goals.

MS sealant works better for outdoor wall joints, putting together premade concrete panels, sealing around doors and windows, natural stone faces, and any room inside that needs to meet air quality standards. With a Shore A hardness of about 45 and a temperature resistance range of -40°C to 120°C, it can be used in most architectural projects in both continental and coastal climates.

Silicone is still the best material for structural glass that needs to be clear under load and for uses that need to keep the temperature above 120°C all the time. However, the regulatory and esthetic benefits of MS sealant are greater than silicone's thermal ceiling for most business remodeling, green building, and export-market construction projects.

Where MS Sealant Delivers the Greatest Value

The clean-surface finish and zero-odor cure of MS sealant make it useful in high-end homes, hospitals, schools, and modular housing assembly. For projects that want to be LEED-certified or BREEAM-rated, procurement teams will find that an isocyanate-free, solvent-free sealant makes compliance paperwork a lot easier compared to acetoxy silicone or polyurethane options.

​

Selecting the Right MS Sealant Supplier

Strong MS product lines with a wide range of certifications are sold by well-known names like Sika and Bostik. Over the past ten years, Chinese makers have grown up a lot, making them a better choice for B2B buyers who want OEM production, private-label differentiation, or cost-competitive sourcing without losing technical performance.

Jiaobao was established in 2013 and has been making things for over 13 years. They make a full-specification one-part RTV MS sealant that comes in 300 ml cartridges and 600 ml sausages and is available in white, black, gray, and special colors. The lead time for production is one to two weeks, and ISO and CE certifications make it easier to sell in regulated markets like Europe, Japan, Korea, and Australia. Issues with quality that happen during the shelf life are covered by a return or replacement. This is a simple guarantee that lowers the risk of buying from new suppliers.

Ask for third-party VOC and formaldehyde test reports from any MS sandariklis statyboms manufacturer before you buy. As part of the sample approval process, a dependable supplier will gladly give these to you.

Environmental and Regulatory Insights for Sealant Selection

Green building rules are getting stricter around the world. In the US, LEED v4.1 sets clear limits on the amount of VOC that can be in sealants and adhesives used on inside assemblies. The European GEV-EMICODE EC1 Plus classification is one of the strictest low-emission standards out there. It needs almost no solvent or formaldehyde content, which solvent-free MS polymer formulations naturally meet.

Some low-VOC ratings allow silicone sealants to be used, but they can't be sprayed and stain porous materials, which can cause problems with specifications in high-end building projects. Hybrid polymer technologies like MS sealant are still being favored by the construction industry as it moves toward circular building design and healthy living settings. When procurement professionals order these materials today, they are building relationships with suppliers that will still be useful when rules get stricter in 2030 and beyond.

Išvada

MS sandariklis statyboms and silicone both work to fix real building issues, but they do so in different ways. MS polymer sealant is the better material for projects that need paintable joints, clean stone facades, low-emission indoor environments, or to meet green certification requirements. Silicone is still useful when performance against UV light or high temperatures is the most important factor in the design. Knowing this difference helps you avoid expensive rework after buying choices and create a portfolio of products that are unique and ready for regulation.

DUK

How long does MS sealant take to fully cure?

Depending on the season and temperature, Jiaobao's MS sealer is tack-free in 15 to 40 minutes. The full mechanical cure is happening at a rate of about 3.5 mm per day. Under normal conditions (23°C, 50% relative humidity), a 10 mm deep joint is usually fully cured in 3–4 days.

Can MS sealant replace silicone in all construction applications?

MS sealer can be used to successfully seal and join most types of building materials. It's not suggested for long-term submersion in water or structural glazing where the bond line will be directly exposed to UV light through the glass. Aside from these specific uses, it works as well as or better than rubber.

Does MS sealant require a primer before application?

There is no need for a primer on metal, glass, PVC, and clean concrete, which are the most frequent substrates. Extremely porous or friable concrete and some polyolefin plastics (PE/PP) work better with a prepared surface and a primer that works well with them, according to test results of adhesion.

What certifications should I request from an MS sealant supplier?

Ask for VOC emission test results, formaldehyde content data, and any EMICODE, EC1, or similar low-emission approvals that are available. For countries outside of Europe, production certification under ISO 9001 and CE marking are basic needs.

How does MS sealant compare to polyurethane sealant?

MS sealer has the same tensile and elongation properties as polyurethane, but it doesn't contain isocyanates, doesn't bubble in high-humidity conditions, and is more stable in UV light without turning yellow. These benefits make it the better choice for most building sealing situations.

Partner with Jiaobao for Your Next MS Sealant Procurement

Jiaobao brings 13 years of experience making things to every order. We are a reliable provider of MS sealant for construction, and our goods are ISO and CE-certified. We also offer short lead times (1–2 weeks), full OEM/ODM capabilities, and quick customer service after the sale. Our team is ready to help you whether you need sample testing, unique formulation, or cheap bulk prices. To get a sample today, email us at doirashen@cnjiaobao.com arba eik į shandongjiaobao.com.

​

Nuorodos

1. ASTM International. ASTM C920: Standartinė elastomerinių siūlių hermetikų specifikacija. ASTM International, 2022.

2. ISO. ISO 9047: Building Construction — Jointing Products — Determination of Adhesion/Cohesion Properties of Sealants at Variable Temperatures. International Organization for Standardization, 2001.

3. GEV — Gemeinschaft Emissionskontrollierte Verlegewerkstoffe. EMICODE Classification System for Construction Products. GEV, 2021.

4. JAV Žaliųjų pastatų taryba. LEED v4.1 pastatų projektavimo ir statybos informacinis vadovas. USGBC, 2022.

5. Wolf, A. T. Sealants in Construction. CRC Press / Taylor & Francis, 2015.

6. Petrie, EM klijų ir hermetikų vadovas. McGraw-Hill, 2007.